March 2019 - Top Quality Replica Watches Website

Everyone Makes A Transparent Watch On The Back, Why Not Replica Rolex Submariner?

March 27, 2019May 31, 2022 lovellggdd

Many friends should find out what brand they are now, and basically do the back side transparency. For example, the movement is very standard. Replica Rolex Submariner is also understandable that the polished technology is highly transparent on the back. After all, it is better to have the capital. However, there are also many brand movements that are not so good or even rough, and they still have to be transparent on the back. And in the environment where everyone is doing the back transparency, the Rolex replica watches who does not have a transparent back is like a clear stream.

In fact, the Replica Rolex Submariner watch is now popular for back transparency, not for no reason. For today’s people, watches are no longer a necessary tool for watching time. Electronic products, especially mobile phones, can tell us the time accurately. Based on this background, watches, especially mechanical watches, are more of a symbol of identity. The embodiment of economic ability is also the pursuit of taste and the love of machinery. For many people, the back transparency is undoubtedly the simplest and straightforward design language of the mechanical watch. Regardless of the mechanical, you can tell that this is a mechanical watch. For experienced players, the back transparency allows them to appreciate the movement of the tasting watch, and also see where their money is spent. After all, the appearance of a replica watches may be imitated, and the movement is its “heart”.

Of course, there is no problem with the exquisite movement. The movement can give you a deep understanding of what is mechanical beauty and what is craftsmanship. However, the movements of some watches are rough and even polished, and they will still be transparent on the back. I believe everyone has seen such watches. I am not critical of this phenomenon, because the watch with a really high-end and exquisite self-produced movement is definitely expensive and most people can’t afford it. While some movements may not be so beautiful, or even the core, the transparent movement on the back can also make a lot of people have fun playing mechanical watches. Because of the lower cost, it is very suitable for the introduction of mechanical watches.

It’s time to say so much. Since everyone is doing transparency on the back, why not Replica Rolex Submariner? The official did not give a clear reason for this, but many of the table friends also have more speculation. Before that, I want to tell you that Rolex has never done transparency on the back. In fact, it has tried the back transparent watch, and is the brand’s only back transparent watch – Prince of Celini. The result was unfortunate. This attempt was not successful. Prince Clinini was not successful. Regardless of how the collectors applauded, he was still beaten into the cold and stopped production. Now, unless you are a veteran player, some people may not know that Rolex has ever been to the Prince of Celini. Unlike Rolex’s popular models like Water Ghost and Daytona, in the second-hand market, a Rolex Prince of the Celini gold watch can be obtained for $10,000, and the price of Prince Celini is Between five and twenty thousand dollars. Not to mention, the money at that time was much more valuable than it is now.

I don’t think that Replica Rolex Submariner has a transparent back. I think so. First, it should be that the brand is in the consideration of product style and positioning. When it comes to Rolex, most people feel reliable, reliable, reliable, and reliable. Reliable, precise and durable, these are the most shining labels for Rolex. Some people say that being a Rolex-like man, both internal and external, is low-key and practical. Why not make the back transparent? Rolex’s philosophy is simple: we are Rolex, we don’t need to show our breasts to prove ourselves.

I think another reason why Rolex doesn’t make the back transparent is to ensure its waterproof performance. Many watch friends also have this guess. In fact, Rolex’s Oyster watch has never been transparent on the back. Here is a explanation of Rolex’s style: the Replica Rolex Submariner refers to the design of the integrated molded case, the screw-in bottom cover and the screw-in head, which was invented by Rolex, namely Oyster. We all know that the biggest feature of the Oyster watch is its waterproof performance. If you change the screw-in bottom cover into a transparent sapphire crystal glass, it will not be a enamel watch, and the waterproof performance will be worse. Even if it is not a sturdy watch, the transparent design on the back will have a certain impact on the waterproof performance of the watch. If you pay attention, you will find that there are really professional diving rolex replica watches that will be transparent on the back, those with transparent back. The table is often not really for diving.

Replica Rolex Submariner does not make the back transparent to ensure the durability of the rolex watches for sale. We all know that Rolex is recognized as the most durable mechanical watch, and Rolex’s resistance is inseparable from the strict testing of Rolex. After each Replica Rolex Submariner watch is assembled, it is subjected to very strict air pressure, water pressure and temperature tests. The outer casing of the watch should be tested twice before the movement and after the movement to ensure the tightness. Among them, there are many procedures, which are called “harsh”. If the back of the watch is made through the bottom, the watch will be affected, and even some of its factory inspections will not pass. Nowadays, the material of the back surface is usually sapphire crystal glass. This material is wear-resistant and scratch-resistant. The surface performance is very good, but the back and the mirror are different. The back of the rolex watch for men is more solid and not strong, not will it appear. Scratches. And even if a transparent material is really comparable to metal, it is unlikely that Replica Rolex Submariner will be transparent on the back. Because from the senses, the transparent back sound always gives people a feeling of not being strong enough.

The cost may also be the reason why Replica Rolex Submariner does not make the back transparent. Because decorative sanding will inevitably increase the fixed cost, it is also contrary to the idea of ?seeking simple and stable labor. If the cost increases, it is inevitable that consumers will pay the bill and the price will naturally rise. But what is the best and most expensive Rolex to sell? Are those expensive models? Not a, but a more basic model, the price is relatively low. Some workers are worried about this problem: if the back side is transparent, the cost will inevitably rise, and the price will definitely rise, so how can we general fans work? Rolex is not a high-cold route. Although the entry price is high, it is not affordable. Therefore, the audience will be so wide and the sales volume will be so high.

Finally, I think that Replica Rolex Submariner hardly does the transparency of the back is also the respect for his own tradition, the persistence and self-confidence of the self, it does not sensationalize, does not follow the tide, but sticks to its essence: practical. It is not without technology, but it understands what is its own foothold, so it can always be “once and for all.” Although many watches are popular on the back, but not everyone is sought after, they say: “I don’t understand why you want to pursue transparency on the back. The Rolex in my eyes is to be yourself, not to imitate others, not to follow the trend. Flow, always only care about the precision, sturdiness and durability inside.” In addition, I feel that Rolex does not make the back side transparent and avoids the impact on the value of the second-hand market of the same series of products. After all, healing is also a big advantage for Replica Rolex Submariner.

Rolex Replica New Sea-dweller Several Features

March 18, 2019May 31, 2022 lovellggdd

In 1967, Rolex launched the first Oyster Perpetual Sea-Dweller watch. 50 years later, this year, the 50th anniversary of the birth of the watch, Rolex replica launched the Rolex Replica New Sea-dweller Ref. 126600. The new replica watches is full of highlights: red letters, bubble windows, larger sizes, and a stronger movement. Today I will take a closer look.

Rolex Replica New Sea-dweller Several Features

Feature 1: Red

Remember the Rolex Double Red Sea-Dweller for $91,000? The Rolex Double Red Sea-Dweller watch with two red letters on the faceplate is not only a watch, but it is also the best evidence that human technological innovation has turned to explore the deep blue sea.

The original Sea-Dweller, number Ref.1665, was born in 1967. It is equipped with a Cal.1575 automatic winding movement that is water resistant to 500 m / 1,650 ft and then raised to 610 m / 2,000 ft. It has a revolutionary automatic exhaust valve, which can be applied to the environment of breathing and oxygen-mixed gas. The first generation of Sea Dweller is equipped with “Sea-Dweller” and “Submariner 2000” red printed lettering. Collectors nicknamed it “double red.”

The biggest feature of the new Sea Dweller is that the Sea-Dweller font on the faceplate is rendered in red, recreating the classic design of the first generation Sea Dweller. The first generation of Sea-Dweller and the new Sea Dweller, we can see the difference between the two, the new Sea Dweller has only one line of red letters, and the Rolex Replica New Sea-dweller waterproof is 1,220 meters (4,000 feet) instead of the original “Submariner 2000” 610 meters (2,000 feet).

Feature 2: Bubble window

Friends who know Rolex Replica New Sea-dweller watches should know that Rolex’s Sea Dweller calendar window at 3 o’clock is an ordinary calendar window, while the water ghost uses a bubble window, a calendar window with a small window convex lens. This time, Rolex put the classic element of the bubble window on the new Sea Dweller, which is the first time that the Sea Dweller watch has a bubble window, which is quite interesting. There is also a more interesting statement about the origin of the Rolex bubble window.

It is said that the second wife of Rolex founder Hans Wilsdorf suffers from eye diseases, often does not see the calendar, and needs to wear glasses every time he watches the calendar, Hans Wilsdorf has been worried about this. Mr. Hans Wilsdorf has a habit of staying in the bathtub for two hours every morning. “He will find the best ideas here,” his widow said.

On one occasion, he suddenly found a drop of water in the bathroom that happened to drop precisely onto the glass at 3 o’clock on the surface of the watch, and the drip was incredibly magnified a lot. Mr. Wilsdorf was inspired, and later the Datejust with a calendar magnifier was born, and Rolex replica later applied the design to his other models, such as the water ghost.

Feature 3: Larger size

I personally feel that in this era of big diameters, the big size should be worth seeing. Rolex has unprecedentedly increased the size of the Rolex Replica New Sea-dweller to 43 mm, and the change from 40 mm to 43 mm is not uncommon, which is rare in Rolex. The reason why Rolex made this change is not that it suddenly “radical”, but the influence of objective factors. Let’s take a look at point four.

Feature 4: Stronger movement

As early as the 3135 upgraded version of the 3235 calibers appeared, there were friends who began to expect it to appear on Rolex’s diving watch, this year Rolex put it on their new Sea Dweller is also worthy of expectations. The objective factor of 43 mm mentioned above is limited to the caliber of this new movement. 3235 is more powerful than the 3135. It has 14 patents and has an accuracy of -2 to +2 seconds per day. It has been awarded the top observatory certification by Rolex in 2015. The power reserve has increased from 50 hours to 70 hours, almost increasing the load of one day. In addition, the movement is also very good at anti-magnetic and anti-vibration. It also has a Rolex global 5-year warranty and is marked with a green seal.

Other features

In addition to the above features, Rolex Replica New Sea-dweller also has some other features. We know that this year is the 50th anniversary of the birth of Rolex Sea Dweller. It is also the 100th anniversary of the birth of the Basel Watch Fair. The 50th Anniversary of Sea Dweller was exhibited at the Centennial Bar Show. It can be said that it is quite meaningful and it is also a watch. A big highlight.

The above points make the Rolex Replica New Sea-dweller have the highest “class” in the current Rolex steel-shell sports watch, and the change is quite strong. Undoubtedly, it is bound to become another popular item in the Rolex diving watch, attracting fans to snap up.

Rolex Cellini Replica Watches: Refined And Elegant, Low-key And Steady

March 13, 2019May 31, 2022 lovellggdd

The name Rolex I think is already a household name. The Crown logo has been imitated many times, but it has never been surpassed. Rolex’s fame lies in its unique taste and solid and durable pragmatic style. From sports to elegance, from fashion to art, Rolex replica presents the charm of watches from many different angles. Cellini is his admiration for art. It is a tribute to Rolex and the Renaissance Pope and the King’s sculptor and goldsmith. Therefore, it represents not decoration, not practicality, but deeper. Thinking at the level. 5241/6 is one of the most representative and popular ones.

Rolex Cellini Replica Watches: Refined And Elegant, Low-key And Steady

Appearance / material

In the very special series of Cellini, each one is the leader, while the 5241/6 black-plated watch looks calm and dignified. The 5241/6 watch is made of 950 platinum and is made of noble and luxurious metal to create a noble and high-grade. Platinum has become a symbol of status and identity because of its extremely low production and its production in only a few countries, which is extremely rare and precious.

The mirror is made of anti-wear sapphire crystal glass. Its high hardness and light transmittance determine the material that is most suitable for the mirror. Just like the material selection of coins, it is the product of historical choice.

The round dial reveals the metallic color of platinum white enamel, which is arrogant and glamorous. The name of the CELLINI master is engraved with the artistic body, which represents its particularity. Connected to the lugs is a black leather strap, which is matched with platinum, complements each other, and the color of the dial reflects the harmony and unity. This is the personality and balance pursued in aesthetics.

The appearance of the Rolex Cellini Replica Watches is calm and temperament, highlighting the elegance of men and the gentleman’s demeanor.

The shape of the case is soft, the color is full, the layout of the disk is just right, the beauty of simplicity is self-evident, the small lugs and the small disk face together to pursue the exquisite design concept. The Cellini series has always paid attention to art, and its replica watches is also The style of art shows a different style.

Features

The Rolex Cellini Replica Watches 5241/6 is an art-inspired style that uses a classic small seconds design that makes the disc no longer monotonous and fills the layer.

The design of the small seconds is often applied to all kinds of watches, almost every chronograph, but the chronograph application of the small second’s design is because of the needs of the movement structure and functional requirements, not simply for the sake of Create a classic. And the classics are undoubtedly those with special significance and historical and cultural details, such as Patek Philippe’s Calatrava, Vacheron Constantin’s heritage series, Omega’s constellation, etc., while Rolex’s Cellini series 5241/6 watch It is such a watch, for the sake of art, for the sake of classics.

At the same time, the Rolex Cellini Replica Watches also has the waterproof function required for daily life. The black belt is a platinum discount, making it easy and comfortable to wear, and easy to operate.

Movement

The Rolex Cellini Replica Watches is a Cal.1240 hand-wound mechanical movement. It is a small three-needle version of 1225. It is very durable and has a lack of decorative sanding.

Rolex’s movement has always been outstanding, but the details of the handling are not very beautiful, and as an elegant movement, the 1240 movement has some parts of the details is still in place, comparable to the world’s top brands of movement level. The 1240 movement is even more practical than the basic movement 215 of PP, so it is one of the top movements in the first-class brand.

to sum up

The Rolex Cellini replica series 5241/6 is generally elegant, low-key and calm, and temperamental. It is a watch full of gentleman charm, but also to pay tribute to art.

Functionally simple yet fun and practical, the design of the small seconds adds a lot of agility to the dignified face, while waterproofing is the area where Rolex is best at, and it is also a must for everyday wear. The movement uses a 1240 manual movement with a Rolex patented blue paramagnetic parachrom hairspring with stable performance and strong shock resistance.

The Rolex 5241/6 watch is characterized by the fact that it is one of Rolex’s rare and elegant models, and it holds the gene of the Cellini series. It has a unique cultural heritage, and the name of the CELLINI master is engraved on the plate to highlight its taste. And the meaning.

Rolex 2019 Basel Watch Show new six speculation

March 8, 2019May 31, 2022 lovellggdd

The Basel exhibition in 2019 is about to begin, and the one with the most attention, no doubt, is Rolex. However, Rolex does not give a hint like Tudor this year, so the major media and some replica watches friends have their own guesses, share it here.

Forecast one: new Milgauss

In recent years, most of Rolex’s professional steel watches have been redesigned, but a popular style has not been updated for a long time, it is Rolex Milgauss replica watches. Perhaps referring to the new sea, they speculated that Milgauss would be an upgrade from the inside out. As shown above, the dial is mainly black, embellished with red, stylish, simple and atmospheric. The movement may be updated to a new generation of 32 movements. There is a great possibility that the performance of the anti-magnetic performance will be improved. This view is mainly based on the efforts and achievements of Rolex’s competitor Omega in anti-magnetic these years.

Prediction 2: Submersible 36 watch

In view of the increasing attention paid to the women’s watch market by major watch brands in recent years, new watches that are attracting current female consumers are being launched. Considering the change of color, changing the mother-of-pearl dial, or simply shrinking the size of the men’s watch and then setting a diamond is the practice of most professional watch brands such as women’s watches, which can not please female consumers. They also like diving watches, sports watches, and large-size watches. Therefore, they speculate that Rolex is likely to launch the Submersible 36 watch this year. 36 is the classic size of Rolex, and now it is also a very neutral size, not only for female consumers but also for those who have a thin wrist or a small watch.

Prediction 3: Re-launch the red and black cola circle GMT

Many fans like Laurel to push the red and black Coke GMT watch. Although it is known that the possibility is small, the prediction is also a way to realize the dream. Of course, this is not a reason for no reason. Last year, Rolex launched the red and blue Pepsi circle GMT, coupled with rumors that the blue-black circle GMT is likely to stop production. so it is not impossible. Their launch is the same as the red and blue cola circle GMT last year, with a five-bead chain, a new generation 3285 caliber and an iconic cola circle. As for the material, everyone definitely wants to be a steel model, but according to Rolex’s past practice, Platinum or Platinum is not impossible.

Prediction 4: Submariner updates the movement

As Rolex updates, the movement on more and more models, the speculation that the water ghost will carry the new generation 3235 caliber has been popular. At present, the submersible series uses the 3135 calibers. As the most popular series of Rolex, its movement upgrade can be said to be very eye-catching. Maybe you don’t upgrade every year, you guess it every year, and there will be an upgrade in one year.

Prediction 5: Black GMT II movement upgrade

This speculation is highly likely to be successful because, after the introduction of three GMT II models last year, it is highly likely that this year’s classic black model will be the turn. The watch will be replaced with a new generation 3285 caliber, model number 126710LN.

Prediction 6: Rolex White Disk Explorer

The white disk Explorer I is an extremely rare Rolex style. In 2013, Christie’s auctioned an extremely rare white disk Rolex 6610, which sold for more than a million. If Rolex is really white-faced Explorer I this year, it will definitely cause a great sensation. the white plate Rolex is actually not so popular, because it will be homophonic “white labor” and “white detective”. However, in my opinion, it is very unlikely that Rolex will have a white disk.

Top Quality Replica Watches Website

Month: March 2019